Vaccum Heating Oven

Vaccum Heating Oven

Rs. 77,900.00
Skip to product information
Vaccum Heating Oven
  • Vaccum Heating Oven
  • Vaccum Heating Oven
Vaccum Heating Oven

Vaccum Heating Oven

Rs. 77,900.00

Why Vacuum Drying for High-Temp Filaments?

High-performance materials like PEEK and PEI absorb moisture from air. Standard hot-air drying often fails to remove deeply absorbed moisture.

Vacuum drying:

  • Lowers boiling point of moisture
  • Enables effective drying at controlled temperatures
  • Prevents oxidation
  • Protects filament material integrity
  • Improves print strength and surface finish

Technical Specifications

Parameter Specification


Chamber Size (Dia x Depth) 250 x 300 mm
Internal Size (Approx.) 10" x 12"
Capacity 15 Liters
Heating Load 2.0 kW
Temperature Range Ambient +10°C to 200°C
Temperature Accuracy ±5°C
Temperature Controller Microprocessor Based PID Digital Controller
Vacuum Range 0–760 mmHg
Vacuum Pump Compatible Rotary Oil-Sealed Vacuum Pump (Included)
Shelves 2 Stainless Steel Shelf
Relay Solid State Electronic Relay with Heat Sink
Power Supply 220/230V, Single Phase, 50Hz
Weight 60kg

Electrical & Wiring Requirements

To ensure safe and reliable operation, the following wiring conditions must be provided at site:

Power Supply

  • 220–230V AC
  • Single Phase
  • 50 Hz frequency

Load Requirement

  • Heating Load: 2.0 kW
  • Approximate Current Draw: ~9–10 Amps

Recommended Electrical Setup

  • Dedicated power line for oven (no shared heavy equipment)
  • 16A industrial-grade socket outlet
  • 16A MCB (Miniature Circuit Breaker)
  • Proper earthing (mandatory)
  • 2.5 sq.mm copper wiring minimum
  • Voltage stabilizer recommended in areas with fluctuation

Earthing Requirement

  • Proper grounding connection required
  • Earth resistance should comply with industrial electrical standards
  • Avoid operating without earthing

Safety Notes

  • Do not use extension boards
  • Do not connect via domestic 6A plug
  • Ensure pump and oven are connected as per supplied wiring diagram

Ideal For Drying

  • PEEK Filament
  • PEI / Ultem
  • PPSU
  • PSU
  • Nylon (PA6, PA12)
  • Carbon Fiber / Glass Fiber Reinforced Filaments
  • High-temp industrial polymers
  • Can also be used for normal filaments like PLA, PETG, ABS, TPU, CF and any type of 3d printing filament.

Recommended Drying Cycle (General Guideline)

Material Temperature Duration
PEEK 120–150°C 4–6 hrs
PEI 110–130°C 4–6 hrs
Nylon 70–90°C 6–8 hrs


Key Advantages for 3D Printing Users

✔ Eliminates moisture-related print defects
✔ Improves interlayer bonding
✔ Enhances mechanical strength
✔ Reduces stringing and bubbling
✔ Stable high-temperature drying up to 200°C
✔ Uniform heat distribution
✔ Industrial-grade oil vacuum pump for deep drying
✔ Suitable for R&D labs, aerospace prototyping, medical, and industrial production


Recommended Use Case for PEEK / PEI

For critical high-temp printing:

  1. Preheat chamber to required drying temperature
  2. Load filament spool
  3. Apply vacuum
  4. Maintain controlled drying cycle (4–8 hrs depending on material)
  5. Store filament in dry cabinet immediately after drying

Perfect For

  • Industrial 3D Printing Farms
  • Aerospace & Defense Prototyping
  • Medical Device Manufacturing
  • Research Labs
  • Advanced Engineering Workshops


What will you get

1) Vaccum Heating Oven x 01pc

2) Pump x 01pc

3) Silicon pipe (1mtr length) x 01pc

WhatsApp Contact: +918921464198

You may also like