ഉൽപ്പന്ന വിവരങ്ങളിലേക്ക് പോകുക
■ Specifications and Performance
■ Output Circuit Diagram
Area Sensor, Plastic Housing Type
Rs. 4,440.00
Rs. 4,440.00
Rs. 5,239.20
PRE ORDER ITEM - DISPATCH AFTER 4 TO 6 DAYS
Part # E-MSMN6-N
Front-lit, space-saving design with a thickness of only 13 mm. Easy to align with light. Light-resistant, strong electromagnetic interference resistance, low power consumption design for faster response time. · Ultra-thin size, dimensions only 13*30 mm · Short response time, fastest response time < 1 ms · Wide voltage supply DC24±20% · Strong anti-electromagnetic interference capability, effectively resists various electromagnetic interference from motor equipment · Uses line synchronization technology, strong resistance to light interference · Easy installation, simple operation
| Part Number | - | Number of Optical Axes | - | Output Type |
| E-MSMN | - | 6 | - | N |
| Part Number |
Number of Shafts |
Output Type |
Detection Height H (mm) | Total Height L (mm) | |
Type |
|||||
| E-MSMN | 6 to 16 |
N(NPN Output) / P(PNP Output) |
100 to 300 | 140 to 350 | |
| Type | Number of Optical Axes | Output Type | Detection Height (mm) | Total height (mm) |
| H | L | |||
| E-MSMN | 6 | NPN: N PNP: P |
100 | 140 |
| 8 | 140 | 190 | ||
| 12 | 220 | 270 | ||
| 16 | 300 | 350 |
■ Specifications and Performance
| Item | Types | Shaft Spacing (20 mm) | ||||
| Part number | NPN Output | E-MSMN6-N | E-MSMN8-N | E-MSMN12-N | E-MSMN16-N | |
| PNP Output | E-MSMN6-P | E-MSMN8-P | E-MSMN12-P | E-MSMN16-P | ||
| Output Action | All beams ON when light passes through (OFF when one or more beams are blocked) Normally Closed | |||||
| Number of Shafts | 6-Axis | 8-Axis | 12 Axes | 16 Axes | ||
| Detection Height | 100 mm | 140 mm | 220 mm | 300 mm | ||
| Detection Distance | 4 m | |||||
| Shaft Spacing | 20 m | |||||
| Object Detection | Opaque objects with a diameter of 30 mm or more (completely light-blocking objects) | |||||
| Operating Voltage | 12 to 24 V DC ±10% Ripple P-P less than 10% | |||||
| Control Output |
<NPN Output Type>
NPN Open Collector Transistor ● Maximum Input Current: 100 mA ● Applied Voltage: 30 V DC or less (between output and 0 V) ● Residual Voltage: 1 V or less (at input current 100 mA) 0.4 V or less (at input current 16 mA) <PNP Output Type>
PNP Open Collector Transistor ● Maximum Input Current: ● Applied voltage: 30 V DC or less (between output and +V) ●Residual voltage: 1 V or less (at 100 mA input current) 0.4 V or less (at 16 mA input current) |
|||||
| Circuit protection | Surge protection circuit, short-circuit protection, reverse polarity protection | |||||
| Response Time | Below 10 ms (below 12 ms when using anti-interference function) | |||||
| Indicator Lamp | Floodlight | Emission Indicator Light: Green LED ×2 (Lights up during emission; 1 LED lights up when frequency A is set, 2 LEDs light up when frequency B is set) Operation Indicator Light: Red LED (When using the operation indicator input, it lights up, blinks, or turns off; the lighting mode is selected by the operation mode switch) |
||||
| Receiver | Operating Status Indicator: Red LED (lights up when one or more optical axes are interrupted) Stable Light Received Indicator: Green LED (lights up when all optical axes are stably received) Operation Indicator: Red LED (lights up, flashes, or turns off when the operation indicator input is used; the lighting mode is selected by the operation mode switch) *When the output current is excessive, both the stable light indicator and the operation status indicator on the receiver will flash simultaneously due to the operation of the short-circuit protection circuit. |
|||||
| Practical Functions | Equipped with anti-interference function and emission stop function | |||||
| Operating environment temperature | -10 to +55°C (no freezing, no condensation), storage: -10 to +60°C | |||||
| Operating environment humidity | 35 to 85%RH, storage: 35 to 85%RH | |||||
| Operating environment illuminance | Incandescent lamp: Illuminance on the receiving surface is below 3000LX | |||||
| Maximum Voltage | 1000 V AC 1 minute Between all power connection terminals and the enclosure | |||||
| Insulation Resistance | Over 20MΩ (500 V DC megohmmeter) between charging section and enclosure | |||||
| Vibration (Durability) | 10 to 55 Hz, 1.5 mm double amplitude, 2h in X, Y, and Z directions | |||||
| Impact (Durability) | 500 m/s2 double amplitude, 3 times in each of the X, Y, and Z directions | |||||
| Light Emitting Element | Infrared LED (Peak Emission Wavelength: 870 nm, Modulated Type) | |||||
| Material | Housing: Heat-resistant ABS, Front Cover: Polyester, Display Cover: Acrylic | |||||
| Cable | 0.2 mm2 4-core rubber cable, length 3 m | |||||
| Connection Method | Lead Wire Type | |||||
■ Output Circuit Diagram
NPN Output
|
PNP Output
|
|||||||||||||||||||||||||||||||||||||||
Floodlight Wire Diameter
|
Receiver Cable Diameter
|
2) To use the work indicator light as a large work status display light, connect the input (pink) on the projector to the output (black) on the receiver. 3) When the projector stop input is set, the work indicator light will not turn on or will flash. |
||||||||||||||||||||||||||||||||||||||
Product Features
· Ultra-thin size, overall dimensions are only 39*15 mm
· Short response time, fastest response time <1 ms
· Wide voltage supply DC24±20%
· Strong anti-electromagnetic interference capability, effectively resists various electromagnetic interference from motor equipment
· Uses line synchronization technology, strong resistance to light interference
· Easy installation, simple operation
· Short response time, fastest response time <1 ms
· Wide voltage supply DC24±20%
· Strong anti-electromagnetic interference capability, effectively resists various electromagnetic interference from motor equipment
· Uses line synchronization technology, strong resistance to light interference
· Easy installation, simple operation
വാട്ട്സ്ആപ്പ് കോൺടാക്റ്റ്: +918921464198
Number of Shafts
Output Type
Type


